Troubleshooting Tips for Electric Garage Doors

Garage Doors and Services in Valparaiso, IN

Nowadays, the garage is more than just an area to park a car. Oftentimes, it will be the first part of your garage door, a person sees upon entering into a house.

This is why it is very important to keep your garage door in good working position with the help of periodic maintenance regime. You can perform some small garage door maintenance tasks on your own but for the bigger parts of the garage door, you will need to take professional help like, Baron Garage Door Repair New Port Richey to keep your garage door in tip-top condition. If you have installed an automatic garage door along with an electric garage door opener, the following are the troubleshooting tips to help you in this regard.

Check the power supply of garage door opener: There is a possibility that electricity is no longer receiving by the garage door opener. Or there is a chance that opener has been unplugged accidentally. Troubleshooting electric problems may need the expertise of experienced technicians. If you found that the opener is plugged in properly, pull the red cord of the emergency mechanism near the opener. If this trick does not work, proceed to the next process.

Galvanized Steel Garage Doors | Solution Garage Doors

Check the tracks of garage door: If garage door got jammed while running on its path, there may chances that there are some obstructions to the tracks like, small stone pebbles or dirt. Dirty tracks make it hard to open and close the garage door. Garage door tracks and rollers should be maintained periodically. Lubricate all the moving parts regularly to keep them in a good working position.

Check the garage door thoroughly: Inspect the garage door to find out any damages. Warps, dents, or any other malformation on the tracks make the garage door hard to operate. If your garage door is badly damaged and you are not able to bang them out, consider replacing the unit with a new one. Let the motor to be cooled for about 15 minutes. It could be overheated due to continuous use. If you feel that the motor does not work properly, you need to consult with a professional.

ZIP-ROLL BRAND, ROLL-UP GARAGE DOOR SCREEN, 16' X 7'-90 DEGREE ...

Check the emergency safety features: Try pressing the emergency push control button. If it does not function accurately, it needs adjustment. If someone in your neighbor is using the same passcode as you, it can create a lot of troubles for you. So, try to change the security code to solve the issue.

Check the garage door alignment: The garage door tracks should be aligned. Screws, nuts, and bolts should be tightening within the mounting brackets. Check and adjust the misaligned tracks if needed. Also, check the signal transmitter. If it works to activate the opener but still the garage door does not open, you should check the drive belt. It may need to be changed.

Check the pulleys and motor: Check the condition of pulleys and its connection to the garage door motor. If they found loose, you may need to adjust the drive belt. Don’t over tighten the cables as they can create more issues. In the case of frayed cables, they should be replaced immediately before they will break suddenly.

Reliable garage doors in Sarnia, ON | Dor-Co Garage Doors

Check other safety devices: Inspect all the safety devices. If the garage door goes back while opening or closing, the safety sensor could be the problem. If the garage door is partially opened or closed, you will have to adjust the height adjustment system. Reset the screw to see if it solves the issue. If it does not work, it’s time to hire a professional for help.

Call a reputed and certified garage door repair technician immediately if you are still having problems while operating the garage door. They will help you in fixing and maintaining your garage door and encounter the main troubles. Just make a call!!